Catalog 1: Tractors, Forklift, Boats, Shop-Power Equipment
Lot 1: BEFORE YOU BID, READ THE "INFORMATION LOTS" OF THIS AUCTION
Shipping Information, Auction Terms, Closing Times and other Important Information are contained in the first 9 "Lots" of this Auction - IMPORTANT: PLEASE READ and UNDERSTAND the Full Terms & Conditions of the Auction.
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 2: TERMS & PAYMENT
10% Buyers Premium for payment by Cash or Approved In-State Check - 14% Buyers Premium when paying with Visa or MasterCard and 16% when Paying with American Express. Payment in Full on Pick-up Day & before removing or loading items. Titled vehicles & Boats cannot be paid for with a credit card - You may pay with cash, certified funds, wire transfer or check approved by Auctioneer.
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 3: CLICK ON PHOTO TO SEE MORE PHOTOS !!
Click on the "Feature Photo" of each Lot to see multiple photos of that Lot. Once you are on the "Lot Page", you can also enlarge each photo to full screen by clicking on it again. DON'T MISS the "SLIDER" on the right as most Lots have MANY photos for you to see ! Scroll the SLIDER.
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 4: INSPECTION DATES and LOCATION - Make Plans to attend.
INSPECTION DATES & TIMES: Sunday, DEC. 7 from 3:00 to 6:00 PM and Wednesday, DEC. 10 from 2:00 to 5:00 PM. These are the ONLY in person Inspection times. LOCATION: 205 Barrus Street, Pollocksville, NC. - On Hwy 17 in Pollocksville, approx. 1/2 mile south of Trent River bridge, turn East on Barrus Street - WATCH FOR SIGNS.
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 5: 5 (five) CATALOGS IN THIS AUCTION - CLOSING TIMES STAGGERED.
There are 5 separate Catalogs in this Auction, each with different Closing Times. Catalog # 1, 2, 3 & 4 will begin closing at 6:00, 6:30, 7:00 & 7:30 PM Eastern respectively, subject to the "AUTO-EXTENDED - EXTEND ALL BIDDING" Feature (See Lot # 6 below). Catalog # 5 with Lots # 410 to 620 will begin closing at 8:00 PM with the Auto Extended Feature on an individual Lot (item) basis, NOT the "Extend All Feature". Catalog # 5 Lots will close at the rate of 25 Lots every ten (10) minutes, with "Auto Extended Bidding" on individual Lots. Be sure to look through ALL 5 Catalogs.
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 6: "AUTO EXTENDED BIDDING - EXTEND ALL BIDDING"
When any item in a specific catalog is bid on in the LAST 5 minutes of the auction, then bidding for ALL items in that specific catalog is extended for 5 minutes, thus the name "EXTEND ALL". HAC reserves the right to reduce the Auto Extend Bidding Period.
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 7: PICK-UP DATES & TIMES - BRING ALL NECESSARY HELP, TOOLS & EQUIPMENT
Saturday, DEC. 13 from 9:00 AM to 4:00 PM and Sunday, DEC. 14 from 2:00 to 4:00 PM ONLY. PLEASE NOTE: We will not be responsible for loading or assisting in loading during the pick-up / checkout period. Please make sure you bring the necessary people, tools and any equipment to help you load. NOTE: There will be LIMITED loading assistance provided with a forklift operated by Sellers agent on Saturday, December 13 ONLY for loading the tractor implements and shop equipment only.
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 8: REFRESH YOUR SCREEN !!
Be sure to refresh your screen continuously at the end of the Auction to make sure that you are seeing the most current bid information. Your screen may not refresh quickly enough on its own !
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 9: SHIPPING via UPS
After receiving payment in full and upon your email request, we will deliver your purchases to The UPS Store in Morehead City, NC for a transportation fee of $15.00 for shipment to you. You will then contact The UPS Store and arrange & pay for shipment. UPS Store phone # is 252-726-4433.
Ends:
Completed
High bidder:
$0.00
Bids:0
Bidding complete
Lot 10: MASSEY FERGUSON 240 Diesel Tractor, approx. 3485 hrs. showing, ser. # 558484
good running condition, good rubber, has been used for mowing the property this past summer with no problems. With two front weights (NOTE: Lot # 10 does NOT include 7 ft. Finishing Mower shown in photos, that sells separate from tractor - see Lot # 15)
Ends:
Completed
High bidder:275 (North Carolina)
$4,300.00
Bids:1
Bidding complete
Lot 11: 1962 INTERNATIONAL FARMALL 140 Tractor, overhauled & repainted, ser. # 19336
almost new tires, great seat, sells with implements attached as shown in photographs, great garden tractor or small row crop operation
Ends:
Completed
High bidder:184 (North Carolina)
$2,600.00
Bids:1
Bidding complete
Lot 12: CATERPILLAR V40C Forklift, 4,000 LB. Capacity, 4 cyl. Gas engine, ser. # 39Y2041, with 6 ft. fork extensions
with Operation Manual, Operation & Maintenance Manual, and Lubrication & Maintenance Guide. NOTE: This Forklift will not be available for pick-up until Sunday, DEC. 14 at 4:00PM, and is being sold subject to Seller's right to use it for load out on DEC. 13 and 14, 2014.
Ends:
Completed
High bidder:248 (Georgia)
$4,400.00
Bids:1
Bidding complete
Lot 13: early INTERNATIONAL FARMALL 130 Tractor - parts tractor
NOT operational
Ends:
Completed
High bidder:184 (North Carolina)
$575.00
Bids:1
Bidding complete
Lot 14: 1965 BERTRAM 25 ft. Yacht, open hull, twin 165 Mercruiser inboard-outboard gas engines, Hull ID # DM904343 - with 2001 LOAD RITE Aluminum Trailer
This classic Bertram was in process of being overhauled and is basically disassembled. The engines are removed, as are the outdrive units, controls, etc. Both engines, outdrives, and all the components that Seller has will sell as one package, along with the 2001 LOAD RITE Aluminum Trailer, dual axle, VIN 5A4XJRJ1812003048. Seller has title to boat & trailer. Please look at ALL the photographs in the catalog. Inspection dates are: Sunday, DEC 7 from 3:00 to 6:00 PM and Wednesday, DEC 10 from 2:00 to 5:00 PM. See Terms regarding transfer of titles / registrations.
Ends:
Completed
High bidder:193 (North Carolina)
$1,800.00
Bids:1
Bidding complete
Lot 15: BUSH HOG RDTH84 7 ft. Finishing Mower with rear discharge
Lot 15 is the Finishing Mower ONLY, NOT the tractor shown in photo
Ends:
Completed
High bidder:188 (North Carolina)
$1,000.00
Bids:1
Bidding complete
Lot 16: WOODS RD600 5 ft. Scraper Blade
N/A
Ends:
Completed
High bidder:192 (North Carolina)
$180.00
Bids:1
Bidding complete
Lot 17: BALTIC Spread Master fertilizer distributor
3 pt. hitch
Ends:
Completed
High bidder:203 (North Carolina)
$220.00
Bids:1
Bidding complete
Lot 18: TUFLINE 6 ft. Box Blade - 3 pt. hitch
N/A
Ends:
Completed
High bidder:223 (North Carolina)
$325.00
Bids:1
Bidding complete
Lot 19: HOLLAND Rotary One 1 row Transplanter, ser. # 944098
N/A
Ends:
Completed
High bidder:184 (North Carolina)
$425.00
Bids:1
Bidding complete
Lot 20: 5 ft. KING KUTTER II Gear Driven Rotary Tiller
3 pt. hitch
Ends:
Completed
High bidder:118 (North Carolina)
$800.00
Bids:1
Bidding complete
Lot 21: Massey Ferguson 3 Bottom Plow - 3 point hitch
M143, Series 1379, ser. # 019323
Ends:
Completed
High bidder:187 (North Carolina)
$150.00
Bids:1
Bidding complete
Lot 22: 7 ft. Landscape Rake - 3 point hitch
N/A
Ends:
Completed
High bidder:203 (North Carolina)
$325.00
Bids:1
Bidding complete
Lot 23: HOLLAND Rotary One 1 row Transplanter
needs repair - on pallet near green warehouse
Ends:
Completed
High bidder:184 (North Carolina)
$40.00
Bids:1
Bidding complete
Lot 24: 5 ft. Tiger Cub Rotary Cutter
needs PTO shaft
Ends:
Completed
High bidder:118 (North Carolina)
$450.00
Bids:1
Bidding complete
Lot 25: COLE 12 MX Multiflex Planter / Fertilizer - one point fast hitch
N/A
Ends:
Completed
High bidder:184 (North Carolina)
$210.00
Bids:1
Bidding complete
Lot 26: IH Middle Buster / Potato Plow - 1 point fast hitch
For Farmall 140 / 130
Ends:
Completed
High bidder:184 (North Carolina)
$350.00
Bids:1
Bidding complete
Lot 27: assorted cultivator implements for Farmall 140 / 130
N/A
Ends:
Completed
High bidder:249 (North Carolina)
$230.00
Bids:1
Bidding complete
Lot 29: 27 ft. ERICSON Sailboat WITH MAST - on stands, with TEXAS Utility / car hauler trailer
Sailboat selling with NO title or registration documents. Other documents related to ERICSON Sailboats in general are included. TEXAS Utility / vehicle trailer sells with title - will be mailed in 30 days following auction. SEE TERMS. 1995 TEXAS Trailer, VIN 17XFP1219S1955439 NOTE: This Item has an EXTENDED PICK-UP TIME PERIOD. Successful Bidder has 2 weeks to remove Sailboat and trailer - Payment due following auction as per Terms & Conditions of Auction. Buyer may leave Sailboat on premises at their own risk for 2 weeks following auction before removing.
Ends:
Completed
High bidder:252 (North Carolina)
$1,800.00
Bids:1
Bidding complete
Lot 30: Kawasaki Jet Ski & BANDIT galvanized trailer
N/A
Ends:
Completed
High bidder:158 (North Carolina)
$120.00
Bids:1
Bidding complete
Lot 31: Woodtek Band saw 24", 3 hp., 240 volt motor
3 hp, 240 volt motor, for specifications on similar model see http://www.manualslib.com/manual/32793/Craftsman-113-248510.html?#manual http://woodworker.com/pdf/959-578.pdf working
Ends:
Completed
High bidder:259 (North Carolina)
$575.00
Bids:1
Bidding complete
Lot 32: Delta "Unisaw" deluxe Table Saw, good working condition
large(52 1/4 " x 26 1/2") side table with unifence guide, rear roller out feed dropdown table, 3 hp, 230 volt motor - Excellent Table Saw for the professional
Ends:
Completed
High bidder:194 (North Carolina)
$900.00
Bids:1
Bidding complete
Lot 33: Delta Planer 13" Invicta planer model 22650
working condition, Delta Invicta planer model 22650, 2hp, 230volts
Ends:
Completed
High bidder:253 (North Carolina)
$300.00
Bids:1
Bidding complete
Lot 34: Delta Jointer 8"
Not running
Ends:
Completed
High bidder:194 (North Carolina)
$275.00
Bids:1
Bidding complete
Lot 35: Blackmax Generator Vanguard 6250 max watts
5000 running watts, 9hp OHV engine, working order
Ends:
Completed
High bidder:203 (North Carolina)
$275.00
Bids:1
Bidding complete
Lot 36: Large Wayne Air Compressor 5 hp, model 6228-SH
5 HP 3 phase GE electric motor, working order
Ends:
Completed
High bidder:173 (North Carolina)
$275.00
Bids:1
Bidding complete
Lot 37: RIGID Pipe Threader model 300-T2, LIKE NEW, with Full Set of Die Blades for threading & Operating Manual, with Heavy Duty Integral FOOT SWITCH
LIKE NEW, with Full Set of Die Blades for threading 1/2" to 3/4" and 1" to 2" & Operating Manual - with Heavy Duty Forward / Off / Reverse & Integral FOOT SWITCH, recently purchased, used VERY little - for specifications on a similar model See: https://www.ridgid.com/us/en/300-power-drive-complete
Ends:
Completed
High bidder:103 (North Carolina)
$1,600.00
Bids:1
Bidding complete
Lot 38: Delta Drill Press with Laser Center Finder, 12 Speeds - Crosshair Laser Drill Press
working order, Delta 17-950L 16-1/2" Crosshair Laser Drill Press, for manual and specs see http://www.deltamachinery.com/downloads/manuals/drilling_boring/17-950L/Manual-A14929_17-950L.pdf
Ends:
Completed
High bidder:199 (North Carolina)
$325.00
Bids:1
Bidding complete
Lot 39: Craftsman 2 Speed Band Saw, 12"
working order, http://www.manualslib.com/manual/32793/Craftsman-113-248510.html?#manual
Ends:
Completed
High bidder:182 (North Carolina)
$220.00
Bids:1
Bidding complete
Lot 40: Craftsman Radial Arm Saw, 10"
model T48BXGPD145-A, working order
Ends:
Completed
High bidder:118 (North Carolina)
$100.00
Bids:1
Bidding complete
Lot 41: Northern Industries Metal Cutting Band Saw 7" x 12"
model BS-712N working order, for specifications on a similar model see http://www.northerntool.com/shop/tools/product_200365544_200365544?utm_source=Natural&utm_medium=Covario&utm_campaign=Northern
Ends:
Completed
High bidder:118 (North Carolina)
$475.00
Bids:1
Bidding complete
Lot 42: Atlas Shaper
model 3500
Ends:
Completed
High bidder:101 (North Carolina)
$40.00
Bids:1
Bidding complete
Lot 43: Central Hydraulics 12 Ton Shop Press
Needs hydraulic bottle jack
Ends:
Completed
High bidder:191 (North Carolina)
$30.00
Bids:1
Bidding complete
Lot 44: Dayton Drill Press 16"
floor model 3Z918C, 5 speed, slight damage but works
Ends:
Completed
High bidder:260 (New Jersey)
$80.00
Bids:1
Bidding complete
Lot 45: Diteq Shibuya Core Drill
model TS-132 for specifications on a similar model see http://www.diteq.com/Shibuya_TS-162_Core_Drill.html
Ends:
Completed
High bidder:192 (North Carolina)
$300.00
Bids:1
Bidding complete
Lot 46: Milwaukee Adjustable Electro Magnetic Drill Press Base with drill motor
model 4203, see http://www.milwaukeetool.com/power-tools/corded/4203 with drill motor 4292-1, see http://www.milwaukeetool.com/power-tools/corded/4292-1
Ends:
Completed
High bidder:217 (North Carolina)
$625.00
Bids:1
Bidding complete
Lot 47: Magnus Venus Products Chopper Gun System
Fiberglass chopper sprayer system
Ends:
Completed
High bidder:209 (North Carolina)
$2,300.00
Bids:1
Bidding complete
Lot 48: Magnus Venus Products Gel Coat Gun System
Fiberglass gel-coat sprayer system
Ends:
Completed
High bidder:209 (North Carolina)
$925.00
Bids:1
Bidding complete
Lot 49: Central Pneumatic Steel Sand Blasting Cabinet model 93608
for similar model specifications see http://manuals.harborfreight.com/manuals/93000-93999/93608.pdf
Ends:
Completed
High bidder:117 (North Carolina)
$150.00
Bids:1
Bidding complete
Lot 50: Speedaire Air Compressor 5 hp, 3 phase
model 5Z404B, 5 horse power, 3 phase, US electric motor
Ends:
Completed
High bidder:224 (North Carolina)
$160.00
Bids:1
Bidding complete
Lot 51: Belle Group Plate Compactor
model PC 450, 18" x 31" pad, 5.5 HP Honda motor, manual included
Ends:
Completed
High bidder:256 (North Carolina)
$275.00
Bids:1
Bidding complete